- Kit Clutch Cover
- Brand
- Asv (30)
- Blue Print (135)
- Borg & Beck (469)
- Comline (178)
- Ducabike (40)
- Evotech (32)
- Exedy (73)
- Harley-davidson (19)
- Honda (49)
- Luk (997)
- Luk, Other (34)
- Mev Spares (18)
- National Auto Parts (31)
- Oe Quality (57)
- On2wheels (30)
- Partzavenue (31)
- Quinton Hazell (103)
- Sachs (69)
- Suzuki (24)
- Valeo (131)
- ... (1116)
- Diameter
- Hub Profile
- 21, 9 X 20 (5)
- 22.2 X 20.4 (5)
- 22.4 X 20 (10)
- 22.7 X 20.2 (5)
- 24, 1 (8)
- 24.1 X 21.5 (4)
- 25 X 22 (5)
- 25, 0 (8)
- 25.1 X 22 (5)
- 25.9 X 23.1 (4)
- 26 X 23 (9)
- 26 X 23.2 (9)
- 26.1 X 23.1 (5)
- 26.1 X 24.1 (4)
- 26.3 X 23 (6)
- 26.3 X 23.3 (11)
- 28.8 X 23.2 (15)
- 29.3 X 26.6 (15)
- 32 X 26 (7)
- 35.3 X 32.6 (15)
- ... (3511)
- Plate Diameter
- Replaces
- 624324209; 624337909 (2)
- 624328600; 624330600 (6)
- 624341200; 624343100 (2)
- 624343433; 624370433 (2)
- Hkt1511 (2)
- 620309034 (3)
- 620311500 (2)
- 620312100 (3)
- 620314500 (2)
- 620321933 (2)
- 622313600 (2)
- 622315809 (2)
- 623310200 (3)
- 624337733 (2)
- 624351400 (3)
- 624354133 (3)
- 624369809 (2)
- 624369833 (4)
- 624378633 (3)
- 3000990384 (3)
- ... (3613)
- Type
Takegawa Special Clutch Cover Kit (Wire Type) Honda MSX125 MSX125SF
Hello And Welcome To My Listing. This listing is for 1 x Takegawa. Special Clutch Cover Kit (Wire Type). Material (Cover): Aluminum with Black Anodized.
Corresponding Clutch: STD Clutch/SP TAKEGAWA Slipper Clutch Kit (02-01-0118). Forged Aluminum Clutch Cover (Wire Type).
The wire clutch adopts a reputed rack & pinion system with a light and smooth operation. The cover is made of forged aluminum, and the surface is shot blasted.
It adopts aluminum die casting for the R. The cover surface is black painted. The cover correspond with standard clutch, SP TAKEGAWA slipper clutch, and SP TAKEGAWA reinforced clutch (wet/dry type). It is possible to upgrade the version to a reinforced clutch (wet type/dry type) after purchasing the clutch cover. Crank Case Cover is made by Aluminum Diecast.Cover surface is black painted. Cover is Normal clutch, SP Takegawa's Slipper clutch (02-01-0118) Correspond to. By installing it, it is possible to reduce the width of the Large width! Centrifugal Oil Filter Approximately 1069 g Oil throughNut About 123 g.
By exchanging with the attached Oil throughNut, you can remove the NORMAL Centrifugal Oil Filter that places a burden on Crankshaft. As a result, we can change the weight of Crankshaft from about 1069 g to about 123 g, which makes it possible to reduce the weight of the lighter weight. Also, by reducing the burden on Crankshaft, Engine response improves. By installing Oil throughNut, it becomes an Oil line leading to Crankshaft. Because it passes through Oil Element, always beautiful Oil flows to Crankshaft.Filter impurities such as Sludge and Gold wear powder in Oil. By removing impurities in Oil, it is possible to maintain Engine output. Oil Element adopts Cartridge TypePaperType with high reliability.
Confirmation of Oil amount is easy. Engine oil Adopting durable Glass for confirmation windows. Large type Filler cap Chromium Plating made by Aluminum Diecast Oil can be easily exchanged by increasing the lubrication port of the Large. [Oil outlet and patent acquisition structure]. Oil can be taken out directly to Oil cooler from Cover Body. SP There is Oil cooler kit for Special clutch cover at Takegawa.Thermostat installation and Oil line structure Oil cooler kit Extract Oil from Special clutch cover Spec. If installed, you can prevent Over cool by installing optional Thermostat Unit.
Adopted a new mechanism that can change Oil line flowing to Cylinder head via Oil Element. By installing the optional Oil Line Hose Kit, Oil flowing to the Head side can also pass through Oil Element, thereby preventing EngineDamage by Oil Sludge etc. To install Oil lineHose SP Bore-Up Cylinder made by Takegawa Co.(Oil withdraw with with Bose) You need to use the Oil outlet boss to Oil cooler at. Part of SP It is not possible to install on Bore-Up Cylinder without Oil removal boss in old eStage made by Takegawa company. By removing Oil from CoverBody to Oil cooler and installing optional Thermostat Unit, Over cool can be prevented. Breather Cap (90° SwivelType) 07-06-0001.
By installing the Breather cap, you can connect ReturnHose when mounting Oil catch tank kit made by SP Takekawa. Oil Line Hose Kit 00-07-0095. By installing the Oil Line Hose Kit, Oil flowing to the Head side can also pass through Oil Element.
This prevents EngineDamage by OilSludge etc. (Excluding eStage) You need to use the Oil outlet boss to Oil cooler at. Compact cool kit (For Special clutch cover).
Use Oil outlet in Cover and install Oil cooler. Kit depends on the mounting position of Oil cooler Body.
Hydraulic Aluminum Billet Clutch Lever 02-01-0170. The operability of the Clutch lever improves. Adjust lever which can adjust the position of Lever is equipped. The product on the photo contains other types. It is required to install the SP TAKEGAWA Oil Cooler Kit at the same time to mount the thermostat.
We At Bens Bikes Have Been Dealing With MiniBikes For 15+ Years Est In 2006. Check Out Our Other Listings All UK Stock. NO HIDDEN CHARGES Collection Available In Store Or All Parts Will Be Posted 1st Class.
The item "Takegawa Special Clutch Cover Kit (Wire Type) Honda MSX125 MSX125SF" is in sale since Thursday, April 25, 2019. This item is in the category "Vehicle Parts & Accessories\Motorcycle Tuning & Styling".
The seller is "bensbikesltd" and is located in Belvedere. This item can be shipped to United Kingdom.- Manufacturer Part Number: 02-01-0150
- Brand: Takegawa